Dmx C02 Cryo Jet


Categories: ,


Dmx / Ac Controlled Dmx Co2 Cryo Jet



–       Model: CE202P – CO2 JET POWERCON
– Power 30 Watts
– Voltage AC110V 50/60HZ  (AC220V Available)
– Operation DMX 512 Only – 1 Channel
– Linkable DMX via XLR Cable
– Height 10 Inches (25.4cm)
– Length 7 Inches (17.7cm)
– Width 10 Inches (25.4cm)
– Weight 18 Lbs (8.1Kg)
– Output High Output
– Reach 25′-35′ feet (7.6-10.6 meters)
– Pressure Rating Up to 1100 psi (75.84 bar)
– Hose Length 15 Feet (4.57 meters)
– Warranty 1 Year – Operational Defect

POWERCON CO2 Jet DMX 512 is the ultimate must have when considering a DMX style CO2 Jet. Taking a standard Co2 Jet and adding DMX capabilities with the option to assign any one of 512 DMX channels, this Co2 Jet is most widely used where DMX channel assignment is of importance. Constructed of a thick metal casing, the Co2 Jet DMX 512 will last through rugged conditions such as tours, mobile applications, and similar. POWERCON CO2 Jet DMX 512 has the capability to be linked to other units via DMX for simultaneous control of multiple jets. It also offers the option to link to other units via power speakon in/out connectors for use of one plug for multiple units (Co2 Jet comes stock with power plug connected to one speakon connector. Additional speakon connector is included in package for users option to daisy chain units.) The nozzle may be adjusted to release CO2 clouds at an angle if so desired by adjusting a fitting at the base of the nozzle. This Cryo Jet comes in 110vAC and 220vAC with ability to be installed on truss or used on floor. Built to withstand rugged conditions, the CO2 Jet DMX 512 reaches heights of 24-34 feet (8-10 meters) and weighs only 18 Lbs (8.1Kg). With easy to follow instructions, included manual and 15 feet (5 meters) of hose, and quick setup time, you will be ready to use this CO2 Jet in minutes, pending you already have CO2. Compatible with both high and low pressure systems. 1 year manufacture warranty. CO2 is not included.

This package comes with the following:
– CO2 Jet DMX 512 unit with attached quick connect fitting and base plate for mounting
– 15′ Foot (5 meters) long hose with attached quick connect fitting
– Brass fitting (to connect hose to CO2 Tank) (Tank NOT included)
– Power Cable 3 Pin DMX Cable (15 foot long)
– Manual, Safety Guidelines, and FAQ (Frequently Asked Questions)

The hose and CO2 Jet listed here have quick connect fittings already installed so you can easily disconnect the hose from the CO2 Jet when not in use. Electricity is required for this package. Simply connect the hose to the CO2 Jet and the other end of the hose to your CO2 tank. Then connect your DMX cable to the CO2 Jet DMX “In” jack and the other end to any DMX 512 controller, then assign the channel of DMX you want the jet to be on, and your ready to go! This CO2 Jet shoots a 25’ – 35’ foot high stream of CO2 which is about 4’-6’ feet wide, of course, depending on humidity level and room temperature! These CO2 Jets are used in stage productions, nightclubs, bars, live performances, concerts, haunted houses, special events and much more. They are similar to a fog machine but do not linger like fog, leave a residue or weird smell, or set off fire alarms. They also significantly cool down an area very quickly. The CO2 dissipates immediately after coming out of the gun so the cloud vanishes in seconds after the user stops activation.

Special Fx Co2 Jet Rental
Special Fx Co2 Jet Rental
Special Fx Co2 Jet Rental